Tag Archives: Artisan Whimsy

5×5 Challenge

Standard

This past month I participated in a very intriguing challenge, along with 4 other Artisan Whimsy members. It’s called 5×5 Testers, and works like this: five artists are chosen each month and each are given five identical components to create with. At the end of the month, all of the pieces are revealed and are featured in the beautiful Bead Chat e-magazine. To see it, click on the “Glossi” link on the right side of the page.

The results are fascinating, as each artist interprets the pieces in their own unique style. I wish I’d have thought to take a picture of the components before I used them (d’oh!), but I do know that some of the other team members did.

Here’s what I came up with-

jewelry 1234

jewelry 1244

I decided to work with this filigree piece first. This was the easiest piece for me, since I work with this style so often. I enhanced just the center of the filigree with Vintaj patinas, and curled the ends under at the sides. At first I was going to join the chain with jumprings, but instead I inserted a headpin with tiny brass beads to work as stoppers. Some absinthe green Czech glass drops swing from the filigree.

Next came the X shaped piece of brass. I gently shaped it with bailing pliers so that it fit the curve of my wrist, and carefully wound hemp cord around the legs and over the center, adding a few African trade beads as I went along. Some vintage cuckoo clock chain and a lobster clasp was added to finish.

jewelry 1268jewelry 1301jewelry 1277

When I saw this large, kind of open weave brass ring I knew I wanted to make a bezel with it, but wasn’t really sure how to go about it. After reading about the process on the ICE resin website, I decided to attempt a backless bezel with resin. I set the frame on a piece of packing tape and poured just a little resin in to cover the inside of the frame. After the first layer was dry I cut a piece of heavy scrapbook paper and laid it in for a background, and continued to add several thin layers of resin, letting it cure between layers. To finish, I painted a brass bird charm and glued it to the front. A couple of tiny bead caps painted with Vintaj patina became little flowers to hide the holes in the bird’s wings.

jewelry 1304

Next I tackled the little square of copper. The edges were pretty sharp, so I filed them a little, and then coated the square with Vintaj patina. Once it dried I sanded it here and there for a distressed look, and added a rusty metal flower layered with a bright Czech glass flower bead. It’s strung on bright turquoise suede cord.

jewelry 1284

Finally, the domed copper disc! This pretty much had me stumped, and I put off dealing with it until the very last minute. I thought about somehow winding wire through the slots but couldn’t come up with anything I liked, so out of desperation I just started punching holes in it. I had some bright colored embroidery thread laying on my table so I used it to make knots in the holes, and glued a flower shaped Czech glass bead to the front. It’s a little weird, but I kind of like it!

jewelry 1307

This challenge was a great exercise, and forced me to think outside my normal creative box! Thanks so much to Melinda Orr for letting me participate, to Alicia Marinache for moderating the challenge, and to Heather Kelly Marston, who generously provided the materials!

Here are links to the rest of this amazing team’s blogs and their fabulous creations –

Charlene Bausinger Jacka     http://www.clay-space.com/blog

Lesley Freedom   http://www.sweetfreedom-designs.blogspot.com

Heidi Kingman     http://www.heidikingman.blogspot.com

Sharyl McMillian-Nelson  http://www.sharylsjewelry.blogspot.com

Heather Kelly Marston      http://www.cswdesignsbyhehe.blogspot.com

 

Advertisements